Haltech

This adapter is designed to connect the Nexus Rebel LS Corvette Pedal Adapter Harness, which is included in a Rebel LS Gen IV kit, to a VE Com...

PD16 Flying Lead Harness - 5M

LSU4.9 Wideband adaptor harness - LSU4.9 to DTM6

This adapter is used to connect the throttle connector on the Nexus Rebel LS main terminated harness to a 6 pin LS DBW throttle.

Suits: Haltech iC-7 Display Dash HT-010001 - iC-7Sensor Pack Includes: 1 x Semi Terminated Harness for iC-7 2 x 3mm ID Ring Terminals 2 x 4mm ID R...

Wideband flying lead adaptor harness - 400mm

NTK Wideband adaptor harness 1200mm

This adapter harness connects the transmission breakout connector on the Rebel LS main terminated harness to a T56 transmission vehicle speed ...

This adapter harness converts the two Gen IV knock sensor connectors on the Rebel LS main terminated harness into a single plug, used in Gen I...

This adapter harness converts the MAP sensor connector on the Rebel LS main terminated harness from an early style/Gen III to a Gen IV connect...

This adapter harness converts the oil pressure sensor connector on the Rebel LS main terminated harness from an early style/Gen III to a Gen I...

This adapter is designed to connect the Accelerator Pedal Position (APP) connector on the Nexus Rebel LS main terminated harness to a Bosch Pe...

This adapter is designed to connect the Accelerator Pedal Position (APP) connector on the Nexus Rebel LS main terminated harness to a Corvette...

This adapter is used to connect the throttle connector on the Nexus Rebel LS main terminated harness to an 8 pin LS DBW throttle.

This adapter is used to connect the throttle connector on the Nexus Rebel LS main terminated harness to a cable-operated GM LS throttle body w...

This sub-harness connects 8 injectors with Multec 2 connectors to the injector breakout connector on the Nexus Rebel LS main terminated harnes...

This sub-harness connects 8 injectors with EV6 connectors to the injector breakout connector on the Nexus Rebel LS main terminated harness

This sub-harness connects 8 injectors with EV1 connectors to the injector breakout connector on the Nexus Rebel LS main terminated harness

Terminated Harness for use with the Rebel LS ECU Injector breakouts HT-186000 V8 Primary Injector EV1 HT-186001 V8 Secondary Injector EV1 HT-18600...

HARNESS OVERVIEW Ideal for dedicated race cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of VCU connectors at o...

HARNESS OVERVIEW Ideal for modified street cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at ...

Bosch LSU 4.9 Sensor Wideband harness Only 1.2m (4'), Pre-terminated with pins to Suit Haltech ECU's / VCU's.

If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug 'n' Play Adapter Kits. These adapters plug direct...

If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly...