Skip to content
Unit 8/94 Delta St, Geebung QLD 4034 | (07) 3089 6030
Get Directions | Call Us Now

Engine Management

Engine Management

Engine Management

Shop engine management for better engine control, tuning flexibility, ignition performance and drivability in performance-focused builds.

Wideband O2 Sensor NTK LZA09-E1 - Laboratory Grade 6mA

Haltech
$360.00 - $360.00
$360.00
$360.00 - $360.00
$360.00

Wideband O2 Sensor only - NTK LZA09-E1 Genuine NTK LZA09-E1 Laboratory Grade (6mA) sensor capable of accurately measuring extremely rich air-to-fue...

View full details
$360.00 - $360.00
$360.00
$360.00 - $360.00
$360.00

NTK Wideband Hardware Pack

Haltech
$315.00 - $315.00
$315.00
$315.00 - $315.00
$315.00

NTK Wideband hardware pack Includes sensor, weld in bung and 1.2M / 47" harness.

$315.00 - $315.00
$315.00
$315.00 - $315.00
$315.00

1/4" Open Tip Thermocouple Length: 0.84m (33")

Haltech
$150.00 - $150.00
$150.00
$150.00 - $150.00
$150.00

1/4" Open Tip Thermocouple only - (0.84m) 33" Long

$150.00 - $150.00
$150.00
$150.00 - $150.00
$150.00

1/4" Open Tip Thermocouple 0.72m (28.5") Length: 0.72m (28.5")

Haltech
$150.00 - $150.00
$150.00
$150.00 - $150.00
$150.00

1/4" Open Tip Thermocouple only - (0.72m) 28-1/2" Long

$150.00 - $150.00
$150.00
$150.00 - $150.00
$150.00

1/4" Stainless Steel Weld-on Kit

Haltech
$30.00 - $30.00
$30.00
$30.00 - $30.00
$30.00

1/4" Stainless Steel Weld-on Kit - inc Nut and Ferrule

$30.00 - $30.00
$30.00
$30.00 - $30.00
$30.00

1/4" Stainless Steel Weld-on Base Only

Haltech
$18.00 - $18.00
$18.00
$18.00 - $18.00
$18.00

1/4" Stainless Steel Weld-on Base Only

$18.00 - $18.00
$18.00
$18.00 - $18.00
$18.00

1/4" Mild Steel Weld-on Kit

Haltech
$30.00 - $30.00
$30.00
$30.00 - $30.00
$30.00

1/4" Mild Steel Weld-on Kit - inc Nut and Ferrule

$30.00 - $30.00
$30.00
$30.00 - $30.00
$30.00

CAN Adaptor Loom DTM-4 to Minifit Jr

Haltech
$50.00 - $50.00
$50.00
$50.00 - $50.00
$50.00

CAN Adaptor Loom (DTM-4 to Minifit Jr) - Suits Microtech

$50.00 - $50.00
$50.00
$50.00 - $50.00
$50.00

1/4" Open Tip Thermocouple Length: 1.52m (60")

Haltech
$150.00 - $150.00
$150.00
$150.00 - $150.00
$150.00

1/4" Open Tip Thermocouple only - (1.52m) 60" Long

$150.00 - $150.00
$150.00
$150.00 - $150.00
$150.00

1/4" Open Tip Thermocouple Length: 1.98m (78")

Haltech
$150.00 - $150.00
$150.00
$150.00 - $150.00
$150.00

1/4" Open Tip Thermocouple only - (1.98m) 78" Long

$150.00 - $150.00
$150.00
$150.00 - $150.00
$150.00

Plug and Pins Only - 16 Pin Tyco 16 Pin TYCO

Haltech
$55.00 - $55.00
$55.00
$55.00 - $55.00
$55.00

Plug and Pins Only 16 Pin TYCO

$55.00 - $55.00
$55.00
$55.00 - $55.00
$55.00

2000 PSI Brake/Nitrous Pressure Sensor Thread: 1/8 NPT

Haltech
$299.00 - $299.00
$299.00
$299.00 - $299.00
$299.00

Please take care when wiring this sensor as incorrect wiring will damage this sensor! All Honeywell Pressure sensors are individually electronicall...

View full details
$299.00 - $299.00
$299.00
$299.00 - $299.00
$299.00

250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm) Thread: 1/8 NPT

Haltech
$299.00 - $299.00
$299.00
$299.00 - $299.00
$299.00

Please take care when wiring this sensor as incorrect wiring will damage this sensor! All Motorsport MAP and Pressure sensors are individually elec...

View full details
$299.00 - $299.00
$299.00
$299.00 - $299.00
$299.00

M10 x 1.0 to 1/8 BSPT Adaptor Thread: M10 x 1.0 Female to 1/8BSPT Male

Haltech
$32.00 - $32.00
$32.00
$32.00 - $32.00
$32.00

M10 x 1.0 to 1/8 BSPT Adaptor - Stainless Steel

$32.00 - $32.00
$32.00
$32.00 - $32.00
$32.00

CAN Adaptor Loom DTM-4 to Flying Leads

Haltech
$33.00 - $33.00
$33.00
$33.00 - $33.00
$33.00

CAN Adaptor Loom (DTM-4 to Flying leads ) - Suits AMP Superseal 1.0 series Connector

$33.00 - $33.00
$33.00
$33.00 - $33.00
$33.00

1/4" Open Tip Thermocouple Length: 1.64m (64.5")

Haltech
$150.00 - $150.00
$150.00
$150.00 - $150.00
$150.00

1/4" Open Tip Thermocouple only - (1.64m) 64-1/2" Long

$150.00 - $150.00
$150.00
$150.00 - $150.00
$150.00

NTK Wideband Hardware Pack

Haltech
$315.00 - $315.00
$315.00
$315.00 - $315.00
$315.00

NTK Wideband hardware pack Includes sensor, weld in bung and 1.2M / 47" harness.

$315.00 - $315.00
$315.00
$315.00 - $315.00
$315.00

1/4" Open Tip Thermocouple Length: 2.21m (87")

Haltech
$150.00 - $150.00
$150.00
$150.00 - $150.00
$150.00

1/4" Open Tip Thermocouple only - (2.21m) 87" Long

$150.00 - $150.00
$150.00
$150.00 - $150.00
$150.00

1/4" Open Tip Thermocouple Length: 2.10m (82.5")

Haltech
$150.00 - $150.00
$150.00
$150.00 - $150.00
$150.00

1/4" Open Tip Thermocouple only - (2.10m) 82-1/2" Long

$150.00 - $150.00
$150.00
$150.00 - $150.00
$150.00

NEXUS R5 Tube Mount Kit - 41.275mm (1.625") Diameter: 41.275mm (1.625")

Haltech
$210.00 - $210.00
$210.00
$210.00 - $210.00
$210.00

Nexus R5 Tube Mount Kit - 41.275mm (1.625")

$210.00 - $210.00
$210.00
$210.00 - $210.00
$210.00

Bosch Injector 980cc (0280158040) Individual Flowmatched Blue

Haltech
$99.00 - $99.00
$99.00
$99.00 - $99.00
$99.00

This Bosch injector is a high-impedance, 980cc fuel injector designed for high-performance engines. It delivers precise fuel flow, supports E85, an...

View full details
$99.00 - $99.00
$99.00
$99.00 - $99.00
$99.00

LS1 Coil with built-in Ignitor

Haltech
$125.00 - $125.00
$125.00
$125.00 - $125.00
$125.00

LS1 Coil with built-in Ignitor

$125.00 - $125.00
$125.00
$125.00 - $125.00
$125.00

DC Motor Driver - DCMD Size: 86mm x 55.5mm

Haltech
$245.00 - $245.00
$245.00
$245.00 - $245.00
$245.00

Native Turbosmart E-gate control limited to Elite and Nexus Series ECU's Platinum Series not supported with this unique function, but outputs will ...

View full details
$245.00 - $245.00
$245.00
$245.00 - $245.00
$245.00

O2 Sensor weld-on bung - 6061 Aluminium Thread: M18 x1.5

Haltech
$22.00 - $22.00
$22.00
$22.00 - $22.00
$22.00

O2 Sensor weld-on bung - 6061 Aluminium

$22.00 - $22.00
$22.00
$22.00 - $22.00
$22.00

Frequently Asked Questions

What does upgrading engine management improve?
Depending on the product, upgrades in this category can improve tuning flexibility, ignition strength, throttle response, drivability or signal accuracy.
Do I need tuning after installing engine management?
Often, yes. Engine management, ignition and trigger-related changes usually work best when the ECU and calibration are checked at the same time.
Are these engine management plug-and-play?
Some are designed as direct replacements, while others may need additional wiring, setup or professional installation depending on the vehicle.
Are these engine management suitable for high performance builds?
Yes. These parts are commonly used when factory control systems become a limitation in modified or motorsport-focused applications.
How do I confirm compatibility with my setup?
Check connector style, ECU support, engine platform and any model-specific notes before ordering, especially on custom or swapped builds.