Skip to content
Unit 8/94 Delta St, Geebung QLD 4034 | (07) 3089 6030
Get Directions | Call Us Now

Engine Management

Engine Management

Engine Management

Shop engine management for better engine control, tuning flexibility, ignition performance and drivability in performance-focused builds.

Fuel Injector Adapter - 14mm 1/2 to 3/4 Length

Haltech
$12.00 - $12.00
$12.00
$12.00 - $12.00
$12.00

This fuel injector adapter allows a 1/2 length (34 mm) injector with 14 mm top O-ring, to be installed as a 3/4 length (48 mm) injector, fitting a ...

View full details
$12.00 - $12.00
$12.00
$12.00 - $12.00
$12.00

Fuel Injector Adapter - 14mm 3/4 to Full Length

Haltech
$12.00 - $12.00
$12.00
$12.00 - $12.00
$12.00

This fuel injector adapter allows a 3/4 length (48 mm) injector with a 14 mm top O-ring, to be installed as a full-sized (60 mm) injector, fitting ...

View full details
$12.00 - $12.00
$12.00
$12.00 - $12.00
$12.00

Fuel Injector Adapter - 11mm 3/4 to Full Length

Haltech
$12.00 - $12.00
$12.00
$12.00 - $12.00
$12.00

This fuel injector adapter allows a 3/4 length (48 mm) injector with a 14 mm top O-ring to be installed as a full-sized (60 mm) injector, fitting a...

View full details
$12.00 - $12.00
$12.00
$12.00 - $12.00
$12.00

Fuel Injector Adapter - 11mm 1/2 to Full Length

Haltech
$12.00 - $12.00
$12.00
$12.00 - $12.00
$12.00

This fuel injector adapter allows a 1/2 length (34 mm) injector with a 14 mm top O-ring to be installed as a full-sized (60 mm) injector, fitting a...

View full details
$12.00 - $12.00
$12.00
$12.00 - $12.00
$12.00

Fuel Injector Adapter - Nissan Base

Haltech
$12.00 - $12.00
$12.00
$12.00 - $12.00
$12.00

This fuel injector adapter allows a 1/2 length (34 mm) injector with an extended tip, and 14 mm top and bottom O-rings, to be installed into a Niss...

View full details
$12.00 - $12.00
$12.00
$12.00 - $12.00
$12.00

High Output CDI Coil

Haltech
$120.00 - $120.00
$120.00
$120.00 - $120.00
$120.00

High Output CDI Coil - inc Plug & Pins

$120.00 - $120.00
$120.00
$120.00 - $120.00
$120.00

Plugs and Pins Only - Suit High Output IGN-1A Inductive Coil with built-in Ignitor

Haltech
$22.00 - $22.00
$22.00
$22.00 - $22.00
$22.00

Plugs and Pins Only - Suit IGN-1A IGBT Coil with Ignitor

$22.00 - $22.00
$22.00
$22.00 - $22.00
$22.00

High Output Inductive Coil

Haltech
$99.00 - $99.00
$99.00
$99.00 - $99.00
$99.00

High Output Inductive Coil suit HPI modules

$99.00 - $99.00
$99.00
$99.00 - $99.00
$99.00

Plug and Pins Only - Suits Hitachi R35 Ignition Coil

Haltech
$21.00 - $21.00
$21.00
$21.00 - $21.00
$21.00

Plug and Pins Only - Suits Hitachi R35 Ignition Coil

$21.00 - $21.00
$21.00
$21.00 - $21.00
$21.00

Plugs and Pins Only - Suit LS1 Coil

Haltech
$22.00 - $22.00
$22.00
$22.00 - $22.00
$22.00

Plug and Pin Kit to suit Haltech LS1 Coil with built-in ignitor.

$22.00 - $22.00
$22.00
$22.00 - $22.00
$22.00

Bosch Injector 1462cc (0280158333) Individual Flowmatched Yellow

Haltech
$199.00 - $199.00
$199.00
$199.00 - $199.00
$199.00

This Bosch injector is a high-impedance, 1462cc fuel injector designed for high-performance engines. It delivers precise fuel flow, supports E85, a...

View full details
$199.00 - $199.00
$199.00
$199.00 - $199.00
$199.00

Plugs and Pins Only - Suit Idle Air Control Motor 2 Screw Style

Haltech
$22.00 - $22.00
$22.00
$22.00 - $22.00
$22.00

Plugs and Pins Only - Suit Idle Air Motor 2 Screw Style

$22.00 - $22.00
$22.00
$22.00 - $22.00
$22.00

Plug and Pins Only - Bosch 5 Pin Junior Timer Female Connector

Haltech
$27.00 - $27.00
$27.00
$27.00 - $27.00
$27.00

Plug and Pins Only - Bosch 5 Pin Junior Timer Female Connect

$27.00 - $27.00
$27.00
$27.00 - $27.00
$27.00

Wideband Sensor - Bosch LSU 4.9

Haltech
$199.00 - $199.00
$199.00
$199.00 - $199.00
$199.00

Wideband Sensor only - Bosch LSU 4.9 with Factory Connector

$199.00 - $199.00
$199.00
$199.00 - $199.00
$199.00

Nexus PD16 Tube Mount Kit 41.275mm (1.625") Diameter: 41.275mm (1.625")

Haltech
$170.00 - $170.00
$170.00
$170.00 - $170.00
$170.00

Nexus PD16 Tube Mount Kit 41.275mm (1.625")

$170.00 - $170.00
$170.00
$170.00 - $170.00
$170.00

CAN Adaptor Loom - DT-4 to DTM-4 Length: 200mm

Haltech
$34.00 - $34.00
$34.00
$34.00 - $34.00
$34.00

CAN Cable - DT to DTM Adaptor- Suits CAN Keypad

$34.00 - $34.00
$34.00
$34.00 - $34.00
$34.00

DC Motor Driver - DCMD Size: 86mm x 55.5mm

Haltech
$245.00 - $245.00
$245.00
$245.00 - $245.00
$245.00

Native Turbosmart E-gate control limited to Elite and Nexus Series ECU's Platinum Series not supported with this unique function, but outputs ...

View full details
$245.00 - $245.00
$245.00
$245.00 - $245.00
$245.00

CO2 Boost Control Dual Solenoid & Pressure Sensor Kit Thread: 1/8 NPT

Haltech
$690.00 - $690.00
$690.00
$690.00 - $690.00
$690.00

CO2 Boost Control Dual Solenoid & Pressure Sensor Kit

$690.00 - $690.00
$690.00
$690.00 - $690.00
$690.00

CAN Adaptor Loom DTM-4 to JST 5-pin

Haltech
$48.00 - $48.00
$48.00
$48.00 - $48.00
$48.00

CAN Adaptor Loom (DTM-4 to JST 5pin) - Suits Link PlugIn ECU's

$48.00 - $48.00
$48.00
$48.00 - $48.00
$48.00

CAN Adaptor Loom DTM-4 to Minifit Jr

Haltech
$50.00 - $50.00
$50.00
$50.00 - $50.00
$50.00

CAN Adaptor Loom (DTM-4 to Minifit Jr) - Suits Microtech

$50.00 - $50.00
$50.00
$50.00 - $50.00
$50.00

CAN Adaptor Loom DTM-4 to 6-pin Circular Connector

Haltech
$75.00 - $75.00
$75.00
$75.00 - $75.00
$75.00

CAN Adaptor Loom (DTM-4 to 6 pin Circular Connector ) - Suits Dual Connector Link ECU's

$75.00 - $75.00
$75.00
$75.00 - $75.00
$75.00

CAN Adaptor Loom DTM-4 to Flying Leads

Haltech
$33.00 - $33.00
$33.00
$33.00 - $33.00
$33.00

CAN Adaptor Loom (DTM-4 to Flying leads ) - Suits AMP Superseal 1.0 series Connector

$33.00 - $33.00
$33.00
$33.00 - $33.00
$33.00

CAN Adaptor Loom DTM-4 to JST 5-pin

Haltech
$48.00 - $48.00
$48.00
$48.00 - $48.00
$48.00

CAN Adaptor Loom (DTM-4 to JST 5pin) - Suits Link PlugIn ECU's

$48.00 - $48.00
$48.00
$48.00 - $48.00
$48.00

Wideband Adaptor Harness - 400mm Length: 400mm

Haltech
$44.00 - $44.00
$44.00
$44.00 - $44.00
$44.00

Wideband flying lead adaptor harness - 400mm

$44.00 - $44.00
$44.00
$44.00 - $44.00
$44.00

Frequently Asked Questions

What does upgrading engine management improve?
Depending on the product, upgrades in this category can improve tuning flexibility, ignition strength, throttle response, drivability or signal accuracy.
Do I need tuning after installing engine management?
Often, yes. Engine management, ignition and trigger-related changes usually work best when the ECU and calibration are checked at the same time.
Are these engine management plug-and-play?
Some are designed as direct replacements, while others may need additional wiring, setup or professional installation depending on the vehicle.
Are these engine management suitable for high performance builds?
Yes. These parts are commonly used when factory control systems become a limitation in modified or motorsport-focused applications.
How do I confirm compatibility with my setup?
Check connector style, ECU support, engine platform and any model-specific notes before ordering, especially on custom or swapped builds.