Engine Management

Length: 450mm (18") Suits: 1/8th NPT Thread MAP, Oil and Fuel Pressure sensors. Includes: Fragola -4 AN Hose with Male & Female 1/8th NPT Adapt...

Thread: 1/8 NPT 27TPI Includes: Matching Bosch EV1 plug & pins. Notes: 150 deg C (302 F) Max reading. Oil Temperature sensor High Range 150°C

Thread: 1/8 NPT Includes: Matching Delphi plug and 3 pins, -4 AN adaptor. Notes: "TI" Pressure sensors must not be mounted directly into the fuel r...

Thread: M18 x1.5 Includes: 1 x Weld on Bung - 303 Stainless Steel 1 x Copper washer and 1 x Blanking plug. O2 Sensor Weldable Fitting Bung and Blan...

Suits: Haltech iC-7 and Microtech ECUs Includes: 1 x HT-130049 Can Adaptor Loom Notes: Use with Microtech CAN Hub for direct plug and play CAN Adap...

Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force GDI) Includes: 1 x CAN Adaptor Loom (DTM-4 to 6-pin ...

Suits: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series Connector Includes: 1 x HT-130046 CAN Adaptor Loom (DTM...

Suits: Haltech IC-7 Dash, WBC 1, WBC 2 and Link Plug-in ECUs Includes: 1 x CAN Adaptor Loom (DTM-4 to JST 5-pin) - Suits Link PlugIn ECUs Notes: Us...

Suits: Haltech iC-7 / uC-10 Includes: 1 x HT-130053 Can Adaptor Loom CAN Adaptor Loom DTM-4 to Molex Mizu-P25 - Suits Holley Used to connect supp...

Suits: Haltech iC-7 / uC-10 Includes: 1 x HT-130052 Can Adaptor Loom Used to connect supported Haltech CAN devices to the DTM-2 CAN connector fou...

Suits: Haltech iC-7 / uC-10 Dash Includes: Cable and Fuse Haltech Dash to OBD II CAN Cable allows the Haltech iC-7 / uC-10 Dash to display the da...

Suits: iC-7/uC-10 Mounting Brackets (HT-060070 and HT-060071) Includes: 1 x Annodized Dash Tube Mount 2 x Zinc M8 x 10 Bracket Mounting Screws 4 ...

Suits: uC-10 Display Dash Includes: Camera - CVBS, 720 x 480, 170 degree viewing angle, IP67 Licence plate mounting bracket 6m (19') Camera wire ha...

Nexus R3 / S3 / S2 Tube Mount Kit - 31.75mm (1.25")

Wi-Fi Antenna. Glass Mount.

Wideband flying lead adaptor harness - 400mm

LSU4.9 Wideband hardware pack Includes sensor, weld in bung and 1.2M / 47" harness plug and play with Nexus Series harnesses

VCU OVERVIEW Nexus R3 combines the functionality of a power distribution module, a data logger, a wideband controller and a state-of-the art engine...

Wi-Fi Antenna. Glass Mount.

Nexus R5 Tube Mount Kit - 31.75mm (1.25")

Wideband flying lead adaptor harness - 400mm

NTK Wideband hardware pack Includes sensor, weld in bung and 1.2M / 47" harness.

LSU4.9 Wideband hardware pack Includes sensor, weld in bung and 1.2M / 47" harness plug and play with Nexus Series harnesses

Nexus R3 / S3 / S2 Tube Mount Kit - 41.275mm (1.625")