BEST SELLERS

10,000 to 10,800 rpm Part Number: MSD8750 RPM Module Kits include five modules in 200 rpm increments. Each kit is within a 1,000 rpm range.

6,100 to 6,900 rpm Part Number: MSD87461 RPM Module Kits include five modules in 200 rpm increments. Each kit is within a 1,000 rpm range.

5,000 to 5,800 rpm Part Number: MSD8745 RPM Module Kits include five modules in 200 rpm increments. Each kit is within a 1,000 rpm range.

Suit AMC 290-401 V8, Magnetic Pickup, Vacuum Advance, High Output Module Part Number: MSD8523 Simple and clean installation with only three w...

Suits: Haltech iC-7 Display Dash Includes: 1 x 2.5mm Black Annodized Aluminium Bracket with integrated Visor and Laser Etched Haltech Logo Notes: S...

Suits: Haltech iC-7 Display Dash HT-010001 - iC-7Sensor Pack Includes: 1 x Semi Terminated Harness for iC-7 2 x 3mm ID Ring Terminals 2 x 4mm ID R...

gaugeART CAN OLED Gauge - Daisy-chain cable (41-001.11)

Length: 150cm (5') Extension Cable for Haltech Multi-Function CAN Gauge

Thread: 3/8 NPT 18TPI Suits: Air Temp Sensor - Large Thread and Coolant Temp Sensor - Large Thread. Weld Fitting 3/8 NPT - Suit Large Air Temp - Al...

Thread: M12 x 1.5 Suits: Coolant Temp Sensor - Small Thread Weld Fitting M12 x 1.5 - Small Thread Water Temp Aluminum

Thread: 3/8 NPT 18TPI Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading. Coolant Temp Sensor - Large Thread 3/8 NPT 18TPI

Thread: M12 x 1.5 Includes: Matching Delphi plug and pins. Notes: 127 deg C (260 F) Max reading. Coolant Temp Sensor - Small Thread M12 x 1.5

Includes: Triple panel, yellow and red adjustment knobs and 3 x 12 position rotary trim modules. 12 Position Rotary Trim Module - (Boost/Fuel/Ign e...

Includes: Dual panel, yellow adjustment knob and 2 x 12 position rotary trim modules. 12 Position Rotary Trim Module - (Boost/Fuel/Ign etc) Dual Sw...

Includes: 2 position decals and matching set of Deutsch DTM 3 connectors (HT-031014) 12 Position Rotary Trim Module - (Boost/Fuel/Ign etc)

Thread: 1/8 NPT Includes: Matching Delphi plug and 3 pins, -4 AN & 5mm hosetail adaptors. Notes: "TI" MAP sensors must not be mounted directly ...

Thread: 1/8 NPT Includes: Matching plug and pins, -4 AN adaptor. Notes: "TI" Pressure sensors must not be mounted directly into the fuel rail or en...

Includes: Matching male Deutsch DTM-3 Connector (HT-031001) 4 Bar Motorsport MAP Sensor

Length: 450mm (18") Suits: 1/8th NPT Thread MAP, Oil and Fuel Pressure sensors. Includes: Fragola -4 AN Hose with Male & Female 1/8th NPT Adapt...

Thread: 1/8 NPT 27TPI Includes: Matching Bosch EV1 plug & pins. Notes: 150 deg C (302 F) Max reading. Oil Temperature sensor High Range 150°C

Thread: 1/8 NPT Includes: Matching Delphi plug and 3 pins, -4 AN adaptor. Notes: "TI" Pressure sensors must not be mounted directly into the fuel r...

Thread: M18 x1.5 Includes: 1 x Weld on Bung - 303 Stainless Steel 1 x Copper washer and 1 x Blanking plug. O2 Sensor Weldable Fitting Bung and Blan...

Suits: Haltech iC-7 and Microtech ECUs Includes: 1 x HT-130049 Can Adaptor Loom Notes: Use with Microtech CAN Hub for direct plug and play CAN Adap...

Suits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force GDI) Includes: 1 x CAN Adaptor Loom (DTM-4 to 6-pin ...