Products
Products
Products
1.15 Bar MAP Sensor (MAP1.15)
Link ECUThe Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sen...
View full details140 Bar Pressure Sensor (HPS)
Link ECUHigh Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone seat M10x1 Thread Includes mating connector kit T...
View full details2.5 Bar MAP Sensor (MAP2.5)
Link ECUThe Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up...
View full details24 Tooth Trigger Wheel MEDIUM (TWM)
Link ECUMedium Diameter Trigger wheel – Small and Large sizes also available. 24 tooth 175 diameter 40mm centre
24 Tooth Trigger Wheel SMALL (TWS)
Link ECUSmall Diameter Trigger wheel – Medium and Large sizes also available. 24 tooth 150mm diameter 40mm centre
3 Bar MAP Sensor (MAP3)
Link ECUThis Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 B...
View full details5 Bar MAP Sensor EU (MAP5EU)
Link ECUThe 5 Bar MAP Variohm Eurosensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running...
View full details6.5 Bar MAP Sensor (MAP6.5)
Link ECUThe Link 6.5 Bar MAP sensor reads up to 6.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up...
View full details60/2 Tooth Trigger Wheel LARGE (TWL)
Link ECULarge Diameter Trigger wheel – Small and Medium sizes also available. 60-2 tooth 200mm diameter 40mm centre
8 Bar MAP Sensor EU (MAP8EU)
Link ECUThe 8 Bar MAP Variohm Eurosensor reads up to 7 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running...
View full detailsAdapter M10 x 1 Female to 1/8 BSP Male
Link ECUStainless Steel thread adapter, M10 x 1 Female to 1/8 BSP Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 BSP threaded ports.
Adapter M10 x 1 Female to 1/8 NPT Male
Link ECUStainless Steel thread adapter, M10 x 1 Female to 1/8 NPT Male, Adapts popular Bosch Metric Pressure Sensors to suit 1/8 NPT threaded ports.
AIM GPS09 Module for AIM Dashes
Link ECUAdd-on GPS module for the MXS and MXG Strada Dashes. 1.3m cable length.Features: Sample lap and split times as well as speed, position and acceler...
View full detailsAir Temp Sensor (IAT1-8)
Link ECUIncludes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread
Air Temperature Sensor (IATB)
Link ECUIncludes Plug Kit - 2 way Bosch Style plug, terminals and boot Aluminium and steel weld in mounting bosses available (IATBMA & IATBMS)
Ballast Resistors
Link ECUFor use with low-impedance injectors. Compatible with injectors with impedance between 2 and 6 Ohms. Please contact us if you are planning on using...
View full detailsBoost Control Solenoid - 3 Port (3BCS)
Link ECUMore boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of ...
View full detailsBoost Control Solenoid - 4 Port (4BCS)
Link ECUThinking of turning up the boost to max? Then this 4 port boost control solenoid is perfect. It allows for precise boost control of up to 120PSI.4 ...
View full detailsCAN Lambda (CANLAM)
Link ECULink’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket...
View full detailsCombined Pressure and Temperature Sensor (CPTS)
Link ECUTwo sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitable for Oil, Cool...
View full detailsCoolant Temperature Sensor (NTC1-8)
Link ECUIncludes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread
Coolant Temperature Sensor (NTC12)
Link ECUIncludes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" NPT Thread
Crank Angle Sensor (CAS)
Link ECUUsed in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost any steel trigge...
View full detailsE-Throttle Accelerator Pedal Module (PED)
Link ECUE-Throttle Accelerator Pedal Module Firewall mounted hanging design 16degree (~70mm) travel Redundant dual output potentiometers suitable for use ...
View full detailsFrequently Asked Questions
No FAQs assigned to this collection.